KRONE EC6210 CV EasyCut Trailed Disc Mower
KRONE EC6210 CV EasyCut Trailed Disc Mower
A 6.20 m working width and a central drawbar make EasyCut 6210 CV one of the most effective trailed mowers on the market. These machines stand out for superior efficiency, maximum stability as well as an advanced level of specification and operator comfort. The CV tine conditioner produces best quality forage.
Key features:
- Take your pick. EasyCut 6210 CV cuts to the right or left of the tractor. The changeover is straightforward indeed. Simply swing the drawbar to the other side as you do the headland turn and match up with the previous pass without mowing in beds. The tractor is not running in standing crop so that clean and loss-free cuts are guaranteed. This way you always use the machine to potential and, in combination with a front-mounted mower, at full work width. In sloping fields, it allows the tractor to work across the slope.
- Top-notch contouring.Two cutterbars in a staggered arrangement rather than one full-width cutterbar operate independently of each other and follow every ground contour.
- Cleanest sweeps. The offset cutterbars and overlapping blades give cleanest cuts both in undulating terrain and when travelling around bends.
- DuoGrip. Each mower pivots in its centre of gravity and trails in a double frame. The ground pressure is maintained across the full work width and is controlled by adjusting the tension springs on the pivoting arm.
- Cutting height control.Cranks set the cutting height steplessly and separately on each unit.
- Fast wilting. Pivoting V-steel tines condition the forage across the full work width at 600rpm or 900rpm (mechanical gearbox). Optional deflectors are available to spread the material across the full width.
- In any direction. The mid-mounted drawbar swings hydraulically to either side of the tractor. The double acting ram gives dependable control even in the most difficult conditions.
- Time is money. Although high work rates are the priority for contractors, travel time is another important cost factor. The EasyCut 6210 CV is a swift road machine that travels at 40 km/h. The robust running gear with air brake system and the large-diameter wheels translate into excellent road safety and operator comfort. The large warning panels and road lights provide safety at dawn and at night.
- Turn on the spot. The swivel-head gearbox (1,000rpm) on the two-point headstock provides the flexibility to turn through 90° and larger angles while the main universal shaft does not move, allowing drive power to flow vibration-free to the cutterbar.
- Direct driveline. The position of the gearboxes on the machine allows using short driveshafts. As a result, the driveline is vibrationfree and there is nearly no wear at all.
- Light treading and easy pulling. The EasyCut 6210 CV models run on oversized wheels and 500/45-22.5 tyres in standard configuration. These have proven best in soft terrain.
- Wide work widths or narrow transport widths. It takes just a few seconds to swing the machine from work into transport position and vice versa. There is no need to leave the tractor. It does not take a sophisticated system to control the semi-mounted chassis and its hydraulic ram. A 2.99 m transport width and 15.0/55-17 tyres ensure this highcapacity mower provides superior rides without requiring special permission for public roads.
Specification for KRONE EC6210 CV EasyCut Trailed Disc Mower
Trailed
6.20m
2.99m
150hp
1000rpm
10
V-tines
No
Mid Mounted
This product has no reviews.
Leave a Review
This product has no questions.
Ask a Question
-
Description
A 6.20 m working width and a central drawbar make EasyCut 6210 CV one of the most effective trailed mowers on the market. These machines stand out for superior efficiency, maximum stability as well as an advanced level of specification and operator comfort. The CV tine conditioner produces best quality forage.
Key features:
- Take your pick. EasyCut 6210 CV cuts to the right or left of the tractor. The changeover is straightforward indeed. Simply swing the drawbar to the other side as you do the headland turn and match up with the previous pass without mowing in beds. The tractor is not running in standing crop so that clean and loss-free cuts are guaranteed. This way you always use the machine to potential and, in combination with a front-mounted mower, at full work width. In sloping fields, it allows the tractor to work across the slope.
- Top-notch contouring.Two cutterbars in a staggered arrangement rather than one full-width cutterbar operate independently of each other and follow every ground contour.
- Cleanest sweeps. The offset cutterbars and overlapping blades give cleanest cuts both in undulating terrain and when travelling around bends.
- DuoGrip. Each mower pivots in its centre of gravity and trails in a double frame. The ground pressure is maintained across the full work width and is controlled by adjusting the tension springs on the pivoting arm.
- Cutting height control.Cranks set the cutting height steplessly and separately on each unit.
- Fast wilting. Pivoting V-steel tines condition the forage across the full work width at 600rpm or 900rpm (mechanical gearbox). Optional deflectors are available to spread the material across the full width.
- In any direction. The mid-mounted drawbar swings hydraulically to either side of the tractor. The double acting ram gives dependable control even in the most difficult conditions.
- Time is money. Although high work rates are the priority for contractors, travel time is another important cost factor. The EasyCut 6210 CV is a swift road machine that travels at 40 km/h. The robust running gear with air brake system and the large-diameter wheels translate into excellent road safety and operator comfort. The large warning panels and road lights provide safety at dawn and at night.
- Turn on the spot. The swivel-head gearbox (1,000rpm) on the two-point headstock provides the flexibility to turn through 90° and larger angles while the main universal shaft does not move, allowing drive power to flow vibration-free to the cutterbar.
- Direct driveline. The position of the gearboxes on the machine allows using short driveshafts. As a result, the driveline is vibrationfree and there is nearly no wear at all.
- Light treading and easy pulling. The EasyCut 6210 CV models run on oversized wheels and 500/45-22.5 tyres in standard configuration. These have proven best in soft terrain.
- Wide work widths or narrow transport widths. It takes just a few seconds to swing the machine from work into transport position and vice versa. There is no need to leave the tractor. It does not take a sophisticated system to control the semi-mounted chassis and its hydraulic ram. A 2.99 m transport width and 15.0/55-17 tyres ensure this highcapacity mower provides superior rides without requiring special permission for public roads.
-
Specifications
Trailed 6.20m 2.99m 150hp 1000rpm 10 V-tines No Mid Mounted -
Reviews
This product has no reviews.Leave a Review
-
Q&A's
This product has no questions.Ask a Question
-
Attachments
-
Images
-
This website was developed with support from Priority 6 (LEADER) of the Northern Ireland Rural Development Programme 2014-2020 by the Department of Agriculture, Environment and Rural Affairs and the European Agricultural Fund for Rural Development: Europe investing in rural areas