PÖTTINGER NOVACAT 3507 T ED Trailed Mower

Disc mower type : Trailed Disc mower working width : 3.46m Disc mower transport height : 2.08m Disc mower transport width : 3.42m Disc mower power (hp) : 85hp Disc mower pto rpm : 1000rpm Disc mower weight : 2206kg Disc mower draw bar type : Mid Mounted

PÖTTINGER NOVACAT 3507 T ED Trailed Mower

High performance with small tractors. On the trailed version with chassis, you do not need any lifting power, so you can also use lower power tractors. This helps you save fuel.

Key features:

  • Mow on either side.  NOVACAT 3507 T offers you maximum flexibility. The central drawbar, which can be swiveled hydraulically to both sides, enables you to mow on either side. Your mower will ideally adapt to your individual preferences and site conditions. 
  • Crosses swaths without dragging. its feet When driving over mowed crop, you need a lifting system that is convenient to use and provides a generous lifting height. A special lifting system provides plenty of clearance for driving over large swaths without damaging them. Uniform lifting/lowering is enabled by feeding oil from one half of the hydraulic cylinder to the cylinder on the other side. 
  • 3D ground tracking. The cutter bar adapts to any ground contour so that you float cleanly over the sward. Two large dimensioned,easily-adjustable suspension springs guarantee optimum ground pressure in all conditions. Suspending the mower unit from a portal frame gives the cutter bar a great deal of freedom of movement. The cutter bar is lowered with the portal frame, releasing the cutter bar for perfect ground tracking.
  • Intelligent cutter bar suspension.  Three-dimensional ground tracking is ensured by the freedom of movement enabled by the cutter bar being suspended in the portal frame. The low-slung cantilever system lets the cutter bar glide over bumps and ridges. The guide arms are mounted on freely moving ball joints.
  • The guide bars sloping up to the cutter bar provide excellent adaptation to ground contours. A top link guides the top of the mower unit to complete the four-point suspension system.
  • Freedom of vertical movement; Up to 200 mm upwards, the cutter bar is inclined 5° upwards, Up to 120 mm downwards, the cutter bar is angled 3° downwards.
  • Mounting yoke. The U-shaped mounting yoke provides a free angle of movement of +/-30°. The tractor and mower can then compensate for uneven ground independently of each other. 
  • Rapid and uniform drying: ED tine conditioner The EXTRA DRY conditioner is a joint development with the Institute of Agricultural Engineering (IMAG-DLO) in Wageningen (Holland) that started in 1997 to prove there is a better way. V-shaped tines made of hardened steel hit the stalks in the crop and guarantee a continuous flow of forage. The tines are mounted flexibly on rubber blocks. The round, high volume conditioner hood and the adjustable guide vanes enable a loose and airy blanket to be placed. You can adjust the conditioning intensity. Depending on individual requirements, a widespread blanket or swath formation is possible.

 

PÖTTINGER NOVACAT  3507 T ED Trailed Mower

Specification for PÖTTINGER NOVACAT 3507 T ED Trailed Mower

Trailed 3.46m 2.08m 3.42m 85hp 1000rpm 2206kg Mid Mounted
This product has no reviews.

Leave a Review

By clicking the Submit button you agree to our T&Cs and Privacy policy

This product has no questions.

Ask a Question

By clicking the Submit button you agree to our T&Cs and Privacy policy

  • Description

    High performance with small tractors. On the trailed version with chassis, you do not need any lifting power, so you can also use lower power tractors. This helps you save fuel.

    Key features:

    • Mow on either side.  NOVACAT 3507 T offers you maximum flexibility. The central drawbar, which can be swiveled hydraulically to both sides, enables you to mow on either side. Your mower will ideally adapt to your individual preferences and site conditions. 
    • Crosses swaths without dragging. its feet When driving over mowed crop, you need a lifting system that is convenient to use and provides a generous lifting height. A special lifting system provides plenty of clearance for driving over large swaths without damaging them. Uniform lifting/lowering is enabled by feeding oil from one half of the hydraulic cylinder to the cylinder on the other side. 
    • 3D ground tracking. The cutter bar adapts to any ground contour so that you float cleanly over the sward. Two large dimensioned,easily-adjustable suspension springs guarantee optimum ground pressure in all conditions. Suspending the mower unit from a portal frame gives the cutter bar a great deal of freedom of movement. The cutter bar is lowered with the portal frame, releasing the cutter bar for perfect ground tracking.
    • Intelligent cutter bar suspension.  Three-dimensional ground tracking is ensured by the freedom of movement enabled by the cutter bar being suspended in the portal frame. The low-slung cantilever system lets the cutter bar glide over bumps and ridges. The guide arms are mounted on freely moving ball joints.
    • The guide bars sloping up to the cutter bar provide excellent adaptation to ground contours. A top link guides the top of the mower unit to complete the four-point suspension system.
    • Freedom of vertical movement; Up to 200 mm upwards, the cutter bar is inclined 5° upwards, Up to 120 mm downwards, the cutter bar is angled 3° downwards.
    • Mounting yoke. The U-shaped mounting yoke provides a free angle of movement of +/-30°. The tractor and mower can then compensate for uneven ground independently of each other. 
    • Rapid and uniform drying: ED tine conditioner The EXTRA DRY conditioner is a joint development with the Institute of Agricultural Engineering (IMAG-DLO) in Wageningen (Holland) that started in 1997 to prove there is a better way. V-shaped tines made of hardened steel hit the stalks in the crop and guarantee a continuous flow of forage. The tines are mounted flexibly on rubber blocks. The round, high volume conditioner hood and the adjustable guide vanes enable a loose and airy blanket to be placed. You can adjust the conditioning intensity. Depending on individual requirements, a widespread blanket or swath formation is possible.

     

  • Specifications

    Trailed 3.46m 2.08m 3.42m 85hp 1000rpm 2206kg Mid Mounted
  • Reviews

    This product has no reviews.

    Leave a Review

    By clicking the Submit button you agree to our T&Cs and Privacy policy

  • Q&A's

    This product has no questions.

    Ask a Question

    By clicking the Submit button you agree to our T&Cs and Privacy policy

  • Attachments

  • Images