PÖTTINGER NOVACAT A9 Mower Combinations with Centre Pivot Suspension
PÖTTINGER NOVACAT A9 Mower Combinations with Centre Pivot Suspension
The NOVACAT A9 mower combination is a front/rear combination with a fixed working width. Working width of 8.92 or 9.18 m with 2 mounting positions. The centre-to-centre spacing of the two mower units is 2.0 m or 2.26 m.
Key features:
- NOVACAT A9 with swath formers.
- NONSTOP LIFT hydraulic collision safety device protects the mower NONSTOP LIFT is an innovative technology that offers the best protection to the cutter bar. Fitted to both sides, the collision safety device enables the cutter bar to avoid obstacles efficiently. When triggered, the boom folds backwards on the triangular frame and is simultaneously raised at the front by the gimbal - a three-dimensional collision safety system. The mower avoids impact with the obstruction so that damage to the cutter bar is prevented even at higher driving speeds.
- Extended service life thanks to Y DRIVE. New generation driveline. The special Y DRIVE input gearbox utilises bevel cut gears and presents the mower drive shaft on the opposing side to the mower. This has the advantage that longer standard PTO shafts can be used with less of an angle in operation.
- The backlash-free driveline using standard driveshafts has been made possible by locating the slip clutch and freewheel directly at the gearbox. Integrated fan blades cool the gearbox in operation. As a result, the driveline offers exceptionally smooth operation even when raised at the headland or in the heaviest of crop conditions. This new design extends service life significantly.
- Consistent power transmission. A constant velocity joint in the inside mower drum provides a stress-free link between the angular gearbox and the cutter bar. The gears are submerged in gear oil.
- Robust technology - long service life. The heavy-duty boom design offers a wide bearing spacing, which carries the cutter bar and provides the optimum in support. The cutter bar is mounted from both ends which protects it against twisting. As a result, the cutter bar gears and bearings are subjected to less stress for smoother operation and a long service life.
Specification for PÖTTINGER NOVACAT A9 Mower Combinations with Centre Pivot Suspension
Combination
8.92m - 9.18m
3.99m
2.95m
160hp
1000rpm
32
2260kg
16
This product has no reviews.
Leave a Review
This product has no questions.
Ask a Question
-
Description
The NOVACAT A9 mower combination is a front/rear combination with a fixed working width. Working width of 8.92 or 9.18 m with 2 mounting positions. The centre-to-centre spacing of the two mower units is 2.0 m or 2.26 m.
Key features:
- NOVACAT A9 with swath formers.
- NONSTOP LIFT hydraulic collision safety device protects the mower NONSTOP LIFT is an innovative technology that offers the best protection to the cutter bar. Fitted to both sides, the collision safety device enables the cutter bar to avoid obstacles efficiently. When triggered, the boom folds backwards on the triangular frame and is simultaneously raised at the front by the gimbal - a three-dimensional collision safety system. The mower avoids impact with the obstruction so that damage to the cutter bar is prevented even at higher driving speeds.
- Extended service life thanks to Y DRIVE. New generation driveline. The special Y DRIVE input gearbox utilises bevel cut gears and presents the mower drive shaft on the opposing side to the mower. This has the advantage that longer standard PTO shafts can be used with less of an angle in operation.
- The backlash-free driveline using standard driveshafts has been made possible by locating the slip clutch and freewheel directly at the gearbox. Integrated fan blades cool the gearbox in operation. As a result, the driveline offers exceptionally smooth operation even when raised at the headland or in the heaviest of crop conditions. This new design extends service life significantly.
- Consistent power transmission. A constant velocity joint in the inside mower drum provides a stress-free link between the angular gearbox and the cutter bar. The gears are submerged in gear oil.
- Robust technology - long service life. The heavy-duty boom design offers a wide bearing spacing, which carries the cutter bar and provides the optimum in support. The cutter bar is mounted from both ends which protects it against twisting. As a result, the cutter bar gears and bearings are subjected to less stress for smoother operation and a long service life.
-
Specifications
Combination 8.92m - 9.18m 3.99m 2.95m 160hp 1000rpm 32 2260kg 16 -
Reviews
This product has no reviews.Leave a Review
-
Q&A's
This product has no questions.Ask a Question
-
Attachments
-
Images
-
This website was developed with support from Priority 6 (LEADER) of the Northern Ireland Rural Development Programme 2014-2020 by the Department of Agriculture, Environment and Rural Affairs and the European Agricultural Fund for Rural Development: Europe investing in rural areas